
With such a rapid growth, what is the current development space of the LED industry? What are the high-speed development opportunities in the subdivided areas? What risks should companies evade when grasping policies and market orientation? An interview with national semiconductor lighting has been held on these issues recently. Wu Ling, Secretary-General of Engineering R&D and Industry Alliance.
The key moments for the integration and development of LED lighting industry will be until the end of 2009. The LED lighting application pilot project of the “Ten Cities Ten Thousands†semiconductor of the Ministry of Science and Technology is very obvious for the LED industry, but there are also negative voices. Before going through the alliance, what should be done about the pilot cities? How should this policy be implemented? Will this policy continue to be promoted this year? Besides, what support will the government have for promoting the development of the LED industry?
Wu Ling: The evaluation of “ten cities and ten thousand people†cannot be done in one go. We believe that the purpose of the policy is to enhance the reliability, quality, and technical level of semiconductor functional lighting through technological innovation, application innovation, and technology integration. Judging from the current pilot demonstration situation, this goal has basically been reached, for example, the exploration of the “Contract Energy Management†(EMC) model was conducted in Guangzhou, Shenzhen, and other places, while Zhejiang Province has achieved good results in promoting LED companies to go abroad; In other places, LED energy-saving lighting is combined with intelligent control. However, due to the lack of guidance and technical specifications at the beginning of the pilot project, some localities have taken a detour.
From this year's point of view, with the gradual maturity and regulation of "ten cities and ten thousand people," policies will continue to be promoted, and the scale will also be expanded. If it is said that exploration last year, then this year's policy will also play a role in nurturing industries and markets. Will really play it out. In addition, the Development and Reform Commission and other relevant departments are studying roadmaps for replacing incandescent lamps. In particular, they are leading the formulation of the "12th Five-Year Plan" for energy-saving industries, and are expected to introduce a subsidy policy to replace LED, incandescent lamps, halogen lamps and other inefficient lighting products. .
In the past two years, the LED industry has created an upsurge, and local governments have also cultivated LED as a key industry. They have not hesitated to use land taxation and other preferential policies to attract enterprises to settle down. Under such circumstances, will China's LED industry have concentrated production capacity in the future? Excess situation?
Wu Ling: LED's industrial chain is very long, covering a wide range of applications is very extensive. It cannot be said easily that there is excess capacity in the entire industry. At present, from the perspective of investment, there are indeed many issues concerning the number of upstream epi-devices purchased and the technical capabilities for general-purpose lighting that cannot be kept up to date. As a result, there have been periodical and structural changes in the development process. Unbalanced issues. With the improvement of technical capabilities for general lighting and the rapid expansion of the market, it is believed that after 3-5 years of industrial integration, the outlook for the semiconductor lighting industry will be very broad.
In the next five years, what is the growth potential of China's LED market and what are the opportunities in the subdivided areas?
Wu Ling: In 2010, the output value of semiconductor lighting in China was 120 billion yuan, which will quadruple in the next five years. In 2010, the growth rate of China's general lighting output value will reach 150%, and the average annual growth rate during the “12th Five-Year Plan†period will exceed 55%. The growth rate of LED backlight output value reached 160%, and the average annual growth rate exceeded 40% during the “12th Five-Year Plan†period. The next 3-5 years will be the key moment for the integration and development of the semiconductor lighting industry. According to the joint calculation of the alliance and related companies, LED lighting products have had alternative advantages for halogen lamps, incandescent lamps, CFL downlights, etc. in 2011, and T8 grille lamps, 150W high-pressure sodium lamps, and 250W high-pressure sodium lamps will have an alternative advantage in 2012.
As soon as possible in 2013, LED will have alternative advantages to 15W home energy-saving lamps. Therefore, indoor lighting products will be mainly pushed bulbs, spotlights, downlights, flat lamps, etc. in recent years; outdoor will be the main street lights and tunnel lights below 250 watts. In addition, it should be noted that LED is not only a technological advancement, but also a revolution in the business model and service model of terminal application products.
REMOTE CONTROL SOCKET
Important Safeguards
When using any electrical appliance, in order to reduce the risk of fire, electric shock and/or injury to persons, basic safety precautions should always be follow8d. including:
• The appliance is for household and indoor use only.
• Before plugging in. check that the voitage on the rating label is the same as the mains supply.
• To protect against electric shock, do not immerse any part of the product in water or other liquid.
• This socket is intended for use by competent adults only and children should be supervised at all times.
• Do not use the socket for other than its intended use.
• This socket can be used by children aged from 8 years arxl above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not p<ay with the appliance Cleaning and user maintenance shall M be made by children without supervision.
• Children of less than 3 years should be kept away unless continuously supervised.
Children from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in. regulate and clean the appliance or perform user maintenance.
• Don't use this socket in the immediate surroundings of a bath, a shower or a swimming pool.
• In case of malfunction, do not try to repair the socket yourself, it may result in a fire hazard or electric shock
Do Not Exceed Maximum a680W
Place the LR44 batteries provided into the compartment in the back of the Remote Control, please insert as sho*/m in the back of the compartment to ensure the polarity is correct.
Programming Instructions
• Plug the Remoce Socket$($)lnto the wall socket(s) and switch on the mams supply, the red LED will flash every second.
• If the LED is not flashing press & hold the manual ON/OFF button for 5 seconds until it Hashes
•Press any ON switch on the Remote Control for approximately 2 seconds and the Remote Socket(s) learn the code. The LED will stop flashing top confirm the codehas been accepted.
• Any number of Remote Sockets can be programmed to one Remote Control ON button to create multiple switching.
• To programme o<her Remote Sockets on different Remote Control ON buttons repeat the prevous steps
• If the mains supply is turned off the Remote Sockets v/ill lose their code and it wil be necessary to re-pcogramme.
Operation:
• Plug your appliance(s) into the Remote Socket(s)
• Press the programmed ON or OFF button on the Remote Control to control the Remote Socket.
♦ The Remote Sockets can also be operated manually using its ON/OFF Button Trouble shooting
If a Remote Socket does not react to the Remote Control please check the followng:
♦ Low battery in tbo Remote Control
• Distance too large between the remote control and the recerver (ensure the range distance is no more than 20 clear Metres) and free from obstacle that may reduce the distance.
• If programming has not been successful, tum the power off and back on then follow the programming steps above.
How to decode
• Press the manual ONX)FF button for 5 seconds until the red LED flashes once per
second to confirm de-coding is successful
♦ Press the ALL OFF switch on the Remote Control for more than 3 seconds, the LED
flashes once per second to confirm (decoding successful.
Voltage: 240V-/50HZ
Max power rating: 3680W max.
Remote frequency:
Remote range:
Battery Type:
433.92MHz
230 Metres
Button Cell 2x1.5V LR44 =
Please check with your local waste management service authority regarding regulations for the safe disposal of the batteries. The batteries should never be placed G municipal waste.
Use a battery d^posal facility if available
M
For eioctncal products sold within the European Community. At the end of the electrical products useful life, it should not be disposed of wth household waste. Please recycle faaMies exist. Check with your Local Authonty or retailer for recycling advice.
C€
remote socket,remote power socket,remote control plugs,remote plug socket
NINGBO COWELL ELECTRONICS & TECHNOLOGY CO., LTD , https://www.cowellsocket.com