Outdoor stage audio six technical requirements sound system and feedback is especially important

Many people think that indoor and outdoor stage audio equipment and systems are the same. In fact, due to different venues, the stage sounds that are often used will be different. Therefore, we cannot use the same scheme to configure different stage sounds. Today we will talk about some requirements of outdoor stage sounds. Of course, specific problems should be analyzed. These requirements are only applicable to most indoor stage sound configurations.
Six major technical requirements for outdoor stage sound
First, the sound system must have a strong power reserve: outdoor open sound field, need to have strong power, because the outdoor sound field should increase the sound pressure level of 3db, the power needs to increase by 10 times, according to the formula 10logp2 /p1 = xdb, can Calculate the specific value of the sound field.
Second, the speaker should be hoisted: the position of the outdoor literary performance speaker can not be too low, the sound of the low-level speaker is easily absorbed by the audience, resulting in grazing and sound absorption, especially for the high-end audio loss, so it should be installed by lifting the speaker. The midrange or treble horn and the outdoor dedicated speaker (the speaker has a high-powered treble horn), so that the sound waves of the speaker radiate far away in the air, so that the auditorium can get enough loudness.
Third, choose high sensitivity mic, which can enhance the mic's sound gain, so that the audience can get enough loudness. Outdoor performances often have a long distance between the MIC and the mixer, so it is better to use a wireless MIC for sound pickup.
Fourth, protect the power line: the energy of the speaker system is from the grid circuit, if the power circuit fails, the sound system will have problems. Therefore, the power circuit should be supported by a local professional electrician. The entire line mixer to indoor or temporary power generation vehicles should be protected by special security personnel.
5. Protecting the speaker cable: The distance between the outdoor performance power amplifier and the speaker is generally far. In order to prevent the fault and damage of the amplifier caused by the disconnection and short circuit of the speaker cable, there must be a special person to protect the speaker circuit, and the output impedance of the power amplifier is small. Only a few ohms, but the sound power is very large, so the current is also relatively large, the line distance is not too long, and the cut-off area should not be too small, so as to avoid unnecessary sound power loss, if possible, the power amplifier Place the speaker closer to reduce unnecessary wear and tear.
6. The sound engineer should keep in touch with the assistant of the auditorium through the walkie-talkie, so that the sound engineer can grasp the sound effect of the auditorium more accurately and in time, so as to make timely adjustments.
It can be seen that the outdoor stage sound is mostly only suitable for outdoor occasions due to the wide space of the venue, etc., especially for some audio systems. This type of sound system is used indoors, and the sound effect may be very poor. Nowadays, there are more outdoor performances, and the construction of stage sounds must have professional skills and equipment to give the audience the best feeling.

Surge Protector and Arrester

An electrical appliance used to protect electrical equipment from high transient overvoltage hazards and to limit the duration of continuous flow.This term includes any external clearance necessary for the normal functioning of the appliance during operation and installation, whether or not it is a unit as a whole.

Surge protector, also known as lightning arrester, is an electronic device that provides safety protection for all kinds of electronic equipment, instruments and communication lines.When the electric circuit or communication lines or for outside disturbance suddenly produce peak current in voltage, surge protector in a very short time conduction tap, to avoid surge damage to other devices in the circuits.[1]

Surge protector, suitable for ac 50/60 hz, rated voltage 220 v to 380 v power supply system, the indirect lightning and thunder and lightning directly affect transient over voltage surge protection, or other applicable to the family home, the third industry and the surge protection industry requirements.


Surge Protector,Surge Voltage Protector,Eco-Friendly Surge Protector,Lightning Protection Surge Protector

YANGZHOU POSITIONING TECH CO., LTD. , https://www.cnfudatech.com

Posted on