Shaver maintenance tips

A razor is like a man's partner. Today I will teach you some maintenance tips so that you can better care for it.

Precautions when charging

In order to maintain the battery performance, it should be used at an ambient temperature of 0-40 degrees Celsius. Do not remove the dry battery for a long time to avoid damage to the machine parts due to leakage. For a rechargeable shaver, the switch should be placed in the “off” position when charging, and the plug should be pulled out immediately after charging. The battery will self-discharge for a long period of time, so it should be charged after being stored for more than three months. Do not charge continuously for more than two days, shortening battery life.

Apply lubricant regularly

Regularly apply a small amount of knife lubricating oil on the inner surface of the outer cutter head. Some internal cutter support shafts or motor shafts and other rotating parts also need to add lubricating oil, but pay attention to the amount of oil not too much. After use, the switch must be turned off. In order to protect the cutting edge, a protective cover must be put in the box and stored in a dry place. Do not wipe clean with alcohol or other volatile chemical liquids.

Do not touch water when cleaning

The most common method of head cleaning is to rinse with water. At this point the body is best not to touch the water, so as to avoid mechanical failure. If the razor you are using is wet or dry, do not touch the water in the base to avoid damaging the motor.

Do not use power shortage

Do not use a power shaved electric shaver. Using it barely can damage the interior.

Use wind balm to kill crickets

After using the razor for a period of time, the locust may grow on the cutter head. Therefore, after the electric razor is used for two weeks, the cutter head should be unscrewed, the blade should be pulled out, the razor must be swept away, and then a half dripping wind should be added to the cutter head. Oil fine kills crickets.