Application of KUKA system in submerged arc welding

Technology

When submerged arc welding is performed, the workpiece is welded through the arc under the solder layer. In addition, this process method can also be used for surfacing. Flux – Automatically fed and absorbed at the end of the welding process to make efficient use of the material – Oxygen is protected by the slag formed to protect the weld and improve the electrical conductivity of the arc.

automation

For the first time, KUKA Systems Co., Ltd. integrates this process method with a robot into a flexible production facility in the manufacture of rail vehicles. Submerged arc welding is particularly effective in long seam welding and thick plate welding. Therefore, this technology is destined to be widely used in the manufacture of steel, containers and commercial vehicles.

Advantage

KUKA Systems Co., Ltd. can choose between single, double wire and double torch welding methods depending on the requirements, mainly to obtain excellent weld quality in metallurgical and mechanical technical equipment. The advantage of this process is that there will hardly be any emissions due to the flux or slag covering the arc and bath. KUKA Systems Co., Ltd. offers more flexibility through automation devices equipped with industrial robots, and can therefore weld more workpiece types.

RJ11/12 connector

Rj11 Connector,Rj12 Connectors,Rj11 Telephone Cable,Rj11 Crystal Head

Dongguan Fangbei Electronic Co.,Ltd , https://www.connectorfb.com