At the Touch Taiwan exhibition held on August 24-26 this year, Heraeus will introduce a new touch panel patterned on Clevios conductive polymer film by DFR (Dry-Film Resist). Process. The process was jointly developed with the Taiwan Industrial Technology Research Institute (ITRI). Showcases a full-featured 7-inch GFF touch panel made with DFR dry film photoresist yellow etch technology.

"The high-resolution pattern of touch sensors is a prerequisite for high-end touch panels, especially for bendable and foldable touch displays." The high-resolution pattern process is an important milestone on Clevios film. Our customers are implementing it quickly. Their feedback is excellent," said Schrader, general manager of the Electronic Chemicals business unit.

Based on this new Heraeus new technology, it is easy to achieve a line width resolution of 50um, and even a finer resolution can be achieved.

The parameter settings and process windows of the entire Clevios touch panel process are now available to customers in their production. Clevios films and sensors can easily withstand more than 300,000 bends with a radius of curvature of less than 1 mm without damage.

Best innovation: Fast infrared (IR) curing contributes to high quality substrates

The second innovation at the Heraeus booth is a 7-inch Clevios conductive polymer flexible touch panel based on an ultra-thin flexible polyimide substrate. Polyimide curing is Heraeus' specialty light source business, and its custom fast infrared curing technology enables the fastest and most efficient curing of ultra-thin polyimide substrate films, which are next-generation flexible displays and Key materials for touch panel substrates. Infrared radiators perform non-contact heat transfer with extremely high efficiency. The curing process is completed in a few minutes compared to a conventional hot blast stove, rather than the previous hours. In addition, pollution is reduced to a minimum due to the absence of air flow. Infrared radiators that precisely match the absorption wavelength of the material can be heated more quickly. The carbon medium wave radiator satisfies the absorption spectrum requirements of polyimide, enabling fast infrared curing and drying.

Dry film photoresist yellow light patterning process technology for conductive polymer films, and fast infrared curing solutions for flexible touch screens

13.8kV High Voltage Generator

EvoTec High Voltage Generator including 13.8kV High Voltage Generator,Three Phase Diesel Generator,13.8Kv High Voltage Generator,60Hz Synchronous Brushless Generator,13800V Synchronous Brushless Generator.Our alternator are widely used in industry, commercial, real estate, hospital, hotel, railway, telecommunications, data-centers and mining etc.

The specific technical features are listed below:
Speed: 1500rpm or 1800rpm
Frequency: 50 Hz or 60Hz
Number of Poles: 4
Power: up to 3500KVA
Voltage: 110V-690V,High Voltage:3.3KV-13.8KV
Insulation: class H
Power Factor: 0.8
Voltage Regulation Rate: ±0.5%
Altitude: 1000M
Temperature Rise Class: class H
Ambient Temperature: 40
Overload:10% for 1 hour in every 12 hours
Degree of Protection: IP21 (IP23, IP44, IP54 on request)

Special Features:

• higher motor starting capability
• a reliable long life with superior class H insulation
• high thyristor load withstand capability for mobile phone and telecom applications
• ease of maintenance with integrated components and outboard exciter/rotating rectifier
• wide range of coupling discs/adaptor for single bearing configuration, suitable for wide range of engine brands

13.8kV High Voltage Generator

Three Phase Diesel Generator,13.8Kv High Voltage Generator,60Hz Synchronous Brushless Generator,13800V Synchronous Brushless Generator

EvoTec Power Generation Co., Ltd , https://www.evotecgen.com