![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
Everyone knows that the water purifier product is different from the previous home appliance products, and it pays more attention to the later maintenance and maintenance. In these aspects, the water purification effect of the water purifier can be optimized and the life span can be longer. However, in real life, the water purifier is inevitably encountering some common faults. What should I do? Please ask the master to repair the door? Actually, it is not necessary, some common glitch, sometimes we only need to do it ourselves. He repaired it well, of course, this requires us to understand some of this knowledge.
1, the new machine has a smell of water
After the water purifier is installed, the water purifier should be flushed first, and the correct flushing method ensures the normal use in the later period. If the flushing sequence is wrong, more problems will occur, especially for the water purification. If the flushing sequence of the water purifier with ultrafiltration membrane is wrong, the protective liquid in the ultrafiltration membrane will enter the rear activated carbon filter, and the protective liquid will affect the activated carbon filter, resulting in a bad mouthfeel of the new machine.
The water outlet of the water purifier requires the installation of a food-grade hose. If the hose material installed in the water purifier outlet of the water purifier is unqualified, the rubber smell of the hose itself will change the taste of the water, which may also cause a bad taste of the water. .
solution:
1) After the installation is completed, flush the water purifier correctly and correctly guide the user to use it.
2) When installing the water purifier, choose a food-grade high-quality hose to avoid unnecessary trouble.
2, the connector leaks
Analysis of the cause: excessive water pressure; improper operation. Generally, pure water machines have a high probability of occurrence.
Solution: Check that the joints that require raw tape, pipe plugs, and rubber gaskets are intact.
3, the membrane shell rupture, carbon leakage, water pressure is too high or low
The water pressure of the water purifier is 0.1mpa-0.35mpa. If the water pressure is too low, it will affect the water output; if the water pressure is too high, it will cause membrane damage. Our common low-pressure switch leaks, leaking activated carbon, activated carbon shell, and ultrafiltration membrane shell rupture are all related to excessive water pressure.
solution:
When installing the water purifier for the customer, before installation, first measure the water pressure to ensure that the water pressure is within the range of the water purifier. If the water pressure is too high, you should communicate with the user and install a pressure reducing valve. If the water pressure is too low, it is recommended to install a pressure pump.
4, the effect of purifying the water is not very obvious
The water source required for the water purifier is municipal tap water. If the water source treated by the water purifier does not meet the requirements of the influent water quality, the phenomenon of poor water purification will occur. The water source used in many places is groundwater, and some places are older ones. The water pipes are all galvanized pipes. Due to the long time, the galvanized pipes are seriously aging, rusting and the water source is turbid. In the case of this water quality, it is recommended that the water purifier not be installed directly. The sediment in the source water, the rust is easily contaminated and the filter element in the water purifier is clogged, resulting in no water or poor water purification effect.
solution:
Before the installation, the water pressure should be checked at the same time. If the water quality does not meet the requirements of the water inlet, it is recommended to communicate with the user. It is recommended to install a pre-filter in front of the water purifier. If the water source used by the user's home is groundwater or reservoir water, a pre-filter must be installed in front of the water purifier.
118 size switch socket, wall switch socket, freedom switch socket
Guangdong Shunde Langzhi Trading CO., Ltd , https://www.langzhielectrical.com