What are the correct ways to use the stainless steel transfer window? -Huaqiang Electronic Network

Probe domestic switch needle KG-300K needle head diameter is 3.0mm normally open switch needle

MOS power IC full range

KKST patch plug-in active passive crystal oscillator hot sale 24.576000MHZ

stainless steel

It is an air purification equipment used in clean workshops. It is suitable for small and medium-sized cargo transfer between clean room or clean room and non-clean room, so as to reduce the number of door opening, so as to reduce the pollution of bacteria to clean areas.

The stainless steel transfer window has the correct method of use. Only through the correct method can it be used to ensure a longer service life and also achieve the true purification effect of the transfer object.

1. The two doors of the stainless steel transmission window should be kept in the closed state during use. There is a transmission window of the electric lighting system. Plug in the power plug first and connect the 220V/50Hz power supply.

2. When it is necessary to disinfect and sterilize the articles conveyed in the stainless steel transmission window, the power switch of the ultraviolet sterilization lamp can be turned on. At this time, the ultraviolet sterilization lamp is lit, and the sterilization and sterilization treatment is performed according to the regulations.

3. For the electronic interlocking type stainless steel transmission window, when opening the door of one side transmission window, the other side door is automatically locked, so when the article is delivered, the door of the transmission window is first opened, and the required transmission is required. After the item is placed in the transfer window, the stainless steel transfer window door is closed. After the sterilization process, the door on the other side of the transfer window can be opened. The same person will immediately close the stainless steel door after removing the transferred items, so as not to affect the next time. The delivery of the item.

4. If the stainless steel transfer window is used to transfer the items, immediately turn off the power switch and unplug the power cord to ensure safe use.