FSM-6000LE adapts to the performance of Corning's four generations of tempered glass surface stress detectors

Test - lowercase jpg
Kaixin micro test
Test probe P100-M3
Supply 0805 side white light side white light original authentic
MP24AE off-the-shelf supply

Features:

1.

The only measurement method that is not available in other models

(

Principle of photoelastic analysis of refractometer

)

.

2.

Automatic measurement, the personal difference caused by the tester is small.

3.

Ability to save data with a computer for quality management.

4.

Samples with poor test conditions can be measured manually.

5.

use

led

Light source, long service life, reaching

10,000

hour

(

before

500

hour

)

.

6.

Glass calibration plates are used to minimize machine error

parameter:

Measuring range:

0-1000Mpa

Measurement accuracy: ±

20Mpa

Measuring range

(

Stress layer depth

): 0-200

μ

m

Accuracy (stress layer depth)

:

±

5

μ

m

Light source: dedicated LED

wavelength

592

±

2nm

Measurement object: chemically strengthened glass

Physical tempered glass

Measuring shape: flat glass

10

×

10mm

or above

Prism:

S-LAL-10 ND=1.72

PC

: Dedicated (OS, measurement software

Installed

O

S:

Windows XP

Professional version

light source

: FSM-LED590

power supply:

AC100V /200V 3A

size:

300

×

600

×

250 (

Measuring head

)

weight:

14KG

200

×

400

×

400 (PC)

weight:

5KG

250

×

400

×

400

(monitor)

weight:

3KG

Glass surface stress meter

FSM6000LE

Fiber Glass Antnenna

1. Why fiberglass antenna is not suitable for indoor use? A: Many people may have noticed that international brands such as Linksys or DLink typically use only 7dB, 5dB and 2dB antennas, while 9dB or higher gain indoor omnidirectional antennas are rarely seen in the market. As far as we know, the 7dB antenna has fully met the requirements of indoor use. The antenna above 7dB has been used. Due to the small Angle, it cannot give full play to its advantages. Therefore, we recommend using an omnidirectional antenna above 9dB for outdoor use. As for someone, it is good to say indoor wall effect, this statement is unable to prove, also need not believe too much. 2. Why are omnidirectional antennas and perpendicular angles called? A: Generally speaking, an omnidirectional antenna is an antenna with a horizontal radiation Angle of 360 degrees and a vertical sector. The Angle is usually around 6 ~ 15 degrees. The higher the gain, the smaller the vertical Angle. For example, the radiation Angle of the 9dB antenna can be about 14 degrees, while the radiation Angle of the FRP antenna can be about 8 degrees as the limit

868MHZ Fiber Glass Antenna ,915MHZ Fiber Glass Antenna ,LoRa Gateway Antenna ,Wifi Antenna ,Fiber Glass Antenna

Yetnorson Antenna Co., Ltd. , https://www.xhlantenna.com

Posted on