[Photo] Using TV pull stalk antenna as FM dipole antenna

The importance of antenna element length

You will find that the following introduction emphasizes that the length of the antenna is 1/2 or 1/4 wavelength, why? When the length of the antenna is not correct, the impedance and the design value are much different, resulting in a reduction in transmission efficiency. For example, the impedance of a properly fabricated half-wave dipole antenna is 75 ohms purely resistive. If its length is halved, its impedance becomes 15-400j ohms, that is, 15 ohms resistance and 400 ohms capacitance reactance. The resistive part of the antenna impedance is the part that is effective for transmission, while the inductive part only causes reflected waves to feed energy back to the transmitter. This phenomenon is generally described by the standing wave ratio (SWR). The closer the standing wave ratio is to 1.0, the better. 1.0 means that the reflected wave is zero.

If no feeder cable is used, the inductive reactance of the antenna can be removed with an additional adjustable inductance or capacitance pin. This is called matching tuning of the antenna. For example, the dipole antenna shortened by half in the above example can use a 400 ohm inductance series inductance pin to remove the 400 ohm capacitance of the antenna, making the antenna 15 ohm purely resistive. But at the same time, the impedance of the output amplifier of the transmitter is required to be less than 15 ohms, which has certain difficulties in circuit design, and the bandwidth of the antenna also becomes very narrow.

The wavelength of radio waves in air is 300 / f meters, where f is the emission frequency (megahertz), for example, the corresponding wavelength of 100 megahertz is 3 meters.

Dipole antenna

The most commonly used antenna is a center-driven half-wave dipole antenna, as shown in Figure A on the right. The production method is: welding a thick copper wire (or copper tube, aluminum tube, or the shielding layer of the coaxial cable) to the BNC socket. The length of the thick copper wire is about 1/4 wavelength, or 75 / f meters, where f is the transmission frequency (megahertz). If you are not sure about the frequency you use, use 70cm. Two sets of such parts are required. Figure B shows how to connect the two sets of parts together. The thick copper wire in the upper part should only be connected to the center of the BNC socket, while the thick copper wire in the lower part should be connected to the BNC housing.

The original impedance of the dipole antenna is 75 ohms. Since the two halves of the dipole are symmetrical (that is, balanced), a "1: 1 balun" is required when connecting with a coaxial cable (unbalanced). The easiest way to make this converter is to wind the cable around 4-5 turns with a diameter of about 10-20cm.

The antenna should be placed vertically, leaving at least 50cm free space between the cable and the antenna.

Using TV pull stalk antenna as FM dipole antenna

The general double-angle TV pull antenna can be used as an FM half-wave dipole antenna. This kind of antenna usually comes with a balun composed of a high-frequency transformer (such as the small box on the left), but it is necessary to test in advance whether this transformer can withstand the power you want to transmit (the coil and the magnetic core do not heat). Another solution for Balun is to directly use the coaxial cable as the feeder, and use 4-5 circles with a diameter of about 10cm (see the introduction above).

The antenna should be placed vertically, each stalk should be 75 / f meters long, and the two stalks should be in a straight line (the same as in figure A above), rather than being V-shaped. The cable and antenna stalks should not be close in parallel, but at least 50cm should be left free.

In-depth analysis of the first-level cache and second-level cache of the technical zone CPU eMMC mass burning dilemma, do you really know? Isolation flyback and non-isolated BUCK application design plan Schottky barrier diode selection and application guide How to use Altium in program design Designer puzzle?

Follow WeChat

Interesting and informative information and technical dry goods

Download Audiophile APP

Create your own personal electronic circle

Follow the audiophile class

Lock the latest course activities and technical live broadcast
Collect People collection
share it:
comment
Publish

related suggestion

[Photo] Use USB port to provide 3.3V and ...

Abstract: Application of USB port and MAX1811, MAX1797, MAX1837 chips to provide 3 ...

Posted at 2006-04-16 23:05 • 611 views
[Photo] Use USB port to provide 3.3V and ...
Using TL431 as a high-power adjustable power supply circuit

Posted at 2006-04-16 23:00 • 1167 reading
Using TL431 as a high-power adjustable power supply circuit
Dipole antenna

Posted at 2006-04-16 20:09 • 399 times read
Dipole antenna
[Photo] FM-DV1 dipole antenna

Posted at 2006-04-15 21:13 • 400 views
[Photo] FM-DV1 dipole antenna
[Photo] FM-DV2 dipole antenna

FM-DV2 dipole antenna

Posted at 2006-04-15 21:13 • 331 views
[Photo] FM-DV2 dipole antenna
[Photo] FM-DV3 dipole antenna

FM-DV3 dipole antenna frequency

Published on 2006-04-15 21:12 • 586 views
[Photo] FM-DV3 dipole antenna
var check_allow = "/d/Api/iscantalk.html"; var add_url = '/ d / article / write /'; function CheckLogin () {now_uid = ''; var ElecfansApi_checklogin = '/ webapi / passport / checklogin'; var logout_url = "{: U ('Login / logout')}"; var logout_url = 'http://bbs.elecfans.com/member.php?mod=logging&action=logout&refer=front'; $ .get (ElecfansApi_checklogin, function (data, textStatus) {if (data! = "") {EchoLoginInfo (data); CheckEmailInfo (data); data = $ .parseJSON (data); now_uid = data.uid; / * var login_content = 'write an article
'+ data.username +'
Quit '; * / var login_content =' write an article
'+ data.username +'
Set exit '; $ (' # login_area '). Html (login_content); var win_width = $ (window) .width (); if (win_width> 1000) {$ ("# mine"). MouseDelay (200) .hover (function () {$ ("# mymenu"). show ();}, function () {$ ("# mymenu"). hide ();});}} else {var content = 'Login Registration'; $ ('# login_area'). html (content); $ (". special-login"). click (function (e) {$ .tActivityLogin (); return false;});}});} $ (function () {// comment ------------------------------- var comment = $ ("# comment"); var comment_input = $ ("# comContent"); // Submit comment click event interaction $ ("# comSubmit2"). on ('click', function () {var content = comment_input.text (); // Empty input box comment_input. html (""). focus (); // Submit data to server $ .ajax ({url: '/plus/arcComment.php', data: {aid: $ ("# webID"). val (), dopost : 'apiPubComment', content: content}, type: 'post', dataType: 'json', success: function (data) {// Data format returned: if (data.status == "successed") {// Build temporary comment DOM var dom = ''; dom + = '
'; dom + =' '; dom + ='
'; dom + ='

'+ data.data.username +' '; dom + ='

'; dom + =' '+ content +' '; dom + =' '; dom + =' just now '; dom + =' '; dom + =' '; // insert a temporary comment to the list $ ("# comment ") .append (dom);} if (data.status ==" failed ") {// alert (data.msg); layer.msg (data.msg);}}}); return false;}); (function () {/ * * Insert single sign-on JS * / var setHost = 'https://passport.elecfans.com'; // Set domain name var script = document.createElement ('script'); script.type = 'text / javascript'; script.src = setHost + '/public/pc/js/t.passport.js'; script.setAttribute ("id", "sso_script"); script.setAttribute ("data-ssoSite", setHost); script.setAttribute ("data-ssoReferer", encodeURIComponent (location.href)); script.setAttribute ("data-ssoSiteid", "11"); var body = document.getElementsByTagName ("body"). item ( 0); body.appendChild (script);}) () / * * It is recommended to modify the style of the article without a picture * * / $ (". Article .thumb"). Each (function () {if ($ (this). find ('img'). attr ('src') == "") {$ (this) .find ('img'). remove (); $ (this) .parent (). css ('padding-left ',' 0px ');}}); / * Baidu share * / window._bd_share_config = {common: {bdText: '', // Custom share content bdDesc: '', // Custom share summary bdUrl: window.location.href, // Custom share URL address bdPic: ''} , share: [{"bdSize": 60, "bdCustomStyle": true}]} with (document) 0 [(getElementsByTagName ('head') [0] || body) .appendChild (createElement ('script')). src = 'http://bdimg.share.baidu.com/static/api/js/share.js?cdnversion=' + ~ (-new Date () / 36e5)]; var add_url = '/ d / article / write / '; // var check_allow = "{: U (' Api / iscantalk ')}"; var check_allow = "/ d / api / iscantalk"; var click_items_length = $ ('. art_click_count '). length; if ( click_items_length> 0) {var id_str = ''; $ ('. art_click_count'). each (function () {id_str + = $ (this) .attr ('data-id') + ',';}) // var url = "{: U ('Api / getclickbyids')}"; var url = "/ d / api / getclickbyids"; var id_data = 'id_str =' + id_str; $ .ajax ({url: url, data: id_data, type: 'post', dataType: 'json', success: function (re) {if (re.list.length> = 1) {var list = re.list; for (var i in list) {var t emp_id = list [i] ['id']; var temp_span = $ (". art_click_count [data-id =" + temp_id + "]") temp_span.html (list [i] ['click']);}} }})} $ ("# comContent"). click (function () {if (now_uid == '') {$ .tActivityLogin (); return false;}}) $ (function () {var follow_wrap = $ ( ".author-collect"); var now_uid = "{$ _super ['uid']}"; var face_src = "{$ _super ['uface']}"; var getFollowNum = $ (". followNum strong"). html (); // Follow $ (window) .on ('click', '.author-collect', function () {if (now_uid == '') {$ .tActivityLogin (); return false;} if ( $ (this) .attr ('id') == 'follow') {$ .post ('/ d / user / follow', {tuid: article_user_id}, function (data) {// Data format returned: if (data.status == "successed") {$ (". followNum strong"). html (++ getFollowNum); follow_wrap.html ('followed'). attr ('id', 'cancelFollow'). css ( 'background', '# 999'); var follow_user = ' '; $ (' # follow_list '). append (follow_user);} if (data.status == "failed") {alert (data.msg);}});} else {// Unfollow if ($ ( this) .attr ('id') == 'cancelFollow') {$ .post ('/ d / user / cancelFollow', {tuid: article_user_id}, function (data) {// Data format returned: if (data .status == "successed") {follow_wrap.html ('Follow'). attr ('id', 'follow'). css ('background', '# f90'); $ (". followNum strong"). html (-getFollowNum); $ ('# follow_list .face'). each (function () {var target_uid = $ (this) .attr ('data-uid'); if (target_uid == now_uid) {$ ( this) .remove ();}})} if (data.status == "failed") {alert (data.msg);}}); return false;}}});});}); / * var myface = "{$ _super ['uid'] | avatar}"; var myname = "{$ _super ['username']}"; var article_id = {$ article ['id']}; var article_user_id = {$ article ['mid']}; // Article author ID $ (function () {<notempty name = "clearnum"> // Reduce the number of reminders var count = parseInt ($ ("# noticeCount"). html ()); count = count-{$ clearnum}; $ ("# noticeCount"). html (count); if ( count

LED street lights achieve ultra brightness/luminance; energy-saving over 70%. Special modular design for theLens (independent modules) and high luminous efficacy, high CRI, easy for maintenance.Intelligent and isolated power supply (NS semiconductor and Japan Rubycon capacitor), reliable and stable; automatically reduce current against overheating working temperature

LED Street Lamp

Led Street Light,Street Lamp,Led Lamp,Street Lamp Post

Yangzhou Beyond Solar Energy Co.,Ltd. , https://www.ckbsolar.com

Posted on